Follow the steps below to enable display name anti-spoofing for one or more users. Check the breadcrumb to ensure you are at the domain level:

ST-SK-breadcrumb-domain.jpg

Note

Once you have enabled Display Name anti-spoofing, you must upload the display names of users you want to protect in order for display name anti-spoofing to be applied. See Adding Display Names for details.

  1. Go to the domain level, and from the side-bar menu select Filtering > Anti-Spoof. Select the Display Name Anti-Spoofing tab at the top.

  2. To enable Display Name anti-spoofing, move the Display Name Anti-Spoofing slider to ON (default: OFF).

    ST-Display-Name-DomainLevel.jpg

    The list of users associated with this domain are listed in the table with the following details:

    • Display Name: User's name displayed in the email header.

    • Email Address: User's work email address.

    • Enabled: Indicates whether display name anti-spoofing is enabled.

    • Updated At: Date and time that the display name was last updated.

  3. To enable display name anti-spoofing for disabled display names, locate the display names with status OFF in the Enabled column.

    ST-Display-Name-Domain-Users.jpg

  4. Select the checkbox(es) and then select Enable. Select Enable again when you are prompted to confirm.

    ST-Display-Name-Domain-Enable.jpg

You can disable a protected user by selecting the display name and then Disable. Select Disable when you are prompted to confirm.